Furniture Fit for a Princess: Upcycled Dress Up Cabinet

Have you ever had times where you have a million projects going on at once but can’t seem to finish one? That’s been my situation for almost three weeks now. I have a list of things to do that’s a mile long, but I haven’t been able to cross anything off…until now. I finally finished something! And boy,  was it worth it!

I currently keep all of my daughter’s dress up clothes in a box on shelves in her room. It makes it difficult for her to find matching pieces and is just so disorganized. There is absolutely no more room in her closet to hang them up, so I decided to make a dress up cabinet from an old dresser I found at a thrift store. Here’s a tutorial of how I created it.

I found this dresser at a thrift store for $10. It’s made of particle board with a wood laminate cover, but it will do the trick.

First, I removed the drawers and knocked out the wood holding the drawers with a hammer. The metal track that the drawers slid on were stapled into the wood.

I had to go to Home Depot to buy a tack remover to pry the staples out because the darn things wouldn’t budge.

Once that was finished, I sanded the piece and used wood puddy to fill in any staple or nail holes. I sanded again.

I then used a spray primer to prime the piece. I was originally going to paint it a bright pink, so I got a gray primer. It was a big mistake when I changed my mind and decided to go with white. It took about four good coats to get it where I wanted.  

I bought some Behr painter and primer in one to paint the inside pink. That actually took very well since there was no laminate on the inside.

I painted “Let’s Play Dress Up” at the bottom.

I hung a dowel rod at the top to hang the costumes.

At first I was going to glue it in, but the glue wouldn’t hold on the paint. I then drilled screws in the sides to hold it, which left ugly screws. I tried painting them but it just wouldn’t cut it.

So, I went to plan B and bought two jeweled crown pins to cover the screws. I removed the pins and glued the crowns over the screws. Worked like a charm.

I was going to make a mirror out and frame it with an old spray painted frame to hang on the side, but  I couldn’t find a mirror that was already cut to fit. I found this mirror at Hobby Lobby for $9.99 which I purchased for $6.00 with a coupon. Because it was cheap, it was also light and hung on the side of the cabinet nicely. The color also matched pretty well, so I didn’t have to paint it.

On the other side, I screwed in a hook which I painted pink to match the inside of the cabinet.

When I FINALLY finished, it looked great, and was ready for all of my little munchkins dress up clothes and accessories!

Here’s the breakdown of what it cost me to make:

Dresser: $10
Rod: $1.49, Michaels
Mirror: $6.00 (with 40% off coupon), Hobby Lobby
Crown Screw Covers: $3.58 (with 2 40% off coupons) Hobby Lobby
Behr Paint Sample in Pink: $2.94, Home Depot
Hook: $3.50 (50% off sale), Hobby Lobby
Primer: 3.98, Home Depot
Spray Paint: $3.87, Home Depot (used nearly 2 cans, but already had one on hand)

Grand Total: $35.38

I was featured!

Linking Up With:

                          

DIY Framed Bow Holder

I absolutely love making stuff for little girls, especially my little priss pot. I wrote a bow holder post a few weeks back showing some of the girls’ hair bow holders I had painted.

I make these pretty often as gifts or to sell, usually personalized, but there’s another bow holder I make that is super cute but really easy. Here’s a tutorial on how I made a framed bow holder using an old wood frame, ribbon, and paint.

First, I found a plain Jane frame from a flea market for $2.50. It’s important that your frame be sturdy and wooden to ensure it will hold up under stapling, none of the cheapos at Wal-Mart. That's why I got a better frame with a very much dated picture for just as cheap at the flea market.

I then removed the backing, glass, and picture from the frame.

I used acrylic paint to paint the frame. If this had been a darker frame or had a slick finish, I probably would have used a primer on it first. I painted the front in a lime green color.

The edge of the frame I painted white.

I used brush strokes down the edge of the frame to make the stripes. This is such a cute and easy way to add character to art pieces.

I then took a pink paint marker and drew swirlies along the frame. For some reason, even with the spray lacquer coating it, they don’t show up well in the pictures.

I sprayed the painted frame with a clear spray lacquer. I use this for everything! I love it! It takes about 24 hours to dry completely, but it dries to the touch in about 20 minutes. Sorry, no pictures of the spray painting. I wouldn't want my mess of a patio shown in my pictures.

Once dry, I cut my ribbon the length of the frame. I then trimmed the excess ribbon. I got a roll of this ribbon at Hobby Lobby when it was half off, making it $2.00. Ribbon goes on sale there about every other week.

I used a standard office stapler to staple the ribbon in to place. I made three rows of the ribbon to allow room for the bows to be displayed.

 

And there you have it! A cute girls’ hair bow holder that is cheap and easy!  



Linking up with:

live laugh rowe

   

    

   

Yesterday on Tuesday